Patriot 5x10 Plus
Why You Need It
The Patriot 5x10 Plus is changing the game when it comes to rigidity and versatility. This machine offers up to 15" in Z axis travel and to do that we had to make some very special changes to our traditional 5x10 frame. The most notable being an entirely unique bridge to the FMT line pulled directly from our D3 machines. This heavier bridge means you do not sacrifice rigidity or quality by increasing your Z axis clearance.
3 Axis CNC Router
5′ x 10′ Table
Available as low as $55,000
Brian with Freedom Machine Tool proved to be a very knowledgeable CNC machinist and an excellent trainer. He strictly walked us through the training regimen while giving us insight into the great potential of Orthorout both within and outside the orthotics industry. The training manual and ancillary notes were incredibly useful not only and training but as reference point after he left. This helped us at Soley Orthotics to better understand the machine's operations and thus our operation of it.
– Brian Raynor // Owner, Soley Orthotics
Patriot 5x10 Machine Details & Options
3-Axis, Moving Gantry Design - 5' x 10' Work Area
Rigid Steel Frame
Up to 15 inch Z-axis
Fagor 8037 Controller
Ethernet TCP / IP, USB and Serial Port Connections
Fagor Industrial AC Servo Motors and Amplifiers on all Axes
Ball Screw Drive Assembly on all Axes
220 Volt 3-phase Power
Dust Collection Hood for Spindle
Lifetime Technical Support
Professional Installation & Training
All FMT machines are built in Colorado Springs, CO at our world headquarters. We handle everything from welding the frame to installing the electrical components entirely in-house. This allows us to provide you with a machine that is truly of superior quality and durability.
Every FMT machines comes with lifetime technical support standard. This means that if you run into any problems you can simply give us a call and an experienced technician will help you get back to producing.
The FMT frame is truly a marvel in this price range. We first start by importing the raw steel (all from North America) and then proceed to weld together the frame based on the size you need. The next step is to stress relieve the welded frame in-house and send the frame off to paint (also in-house). We then do a final check on the frame to ensure everything is to the correct specifications and then proceed to the next step. A critical component of every FMT frame is the thick steel we use and the over abundance of weld points throughout the frame. We realize we could save time by doing the bare minimum but nothing on the FMT is anything less than world class.
All axes are driven by a reciprocating ball screw assembly. The ball screw keeps it’s accuracy longer than a rack-n-pinion system and is the ideal choice for this size of machine.
We utilize Fagor control systems on every machine we build. We have over 1,000 active machines currently using Fagor and have extensive knowledge of the control system. The industrial control is designed to run your CNC and made for a production environment. We often see other companies advertise an "industrial PC control" and while it may be appealing to go with a keyboard and mouse, you can do everything on the Fagor control with a greater degree of accuracy as well as processing speed. We choose to use the same Fagor controls in the FMT machines that we have become known for across Fortune 500 companies and large production shops. They demand the Fagor industrial control and we know it is the right choice for any production CNC environment.
Every install is completed by an experienced technician that will walk you through everything you need to know in order to operate the machine. We do not expect you to know how to use the machine and take it upon ourselves to teach you and your staff. The FMT is easy to use and easy to service.
Buying an FMT is more than buying a high quality machine. Buying an FMT means you get all the benefits of purchasing from an experienced company at a price that is affordable. FMT is the only CNC in it's class to offer over 35 years of CNC experience as well as experience producing on a world stage. Diversified Machine Systems is a premier CNC manufacturer and has strong relationships with Autodesk, HSD, Fagor, Mastercam, Bosch, Vectric, and many others-all working together to provide you with a CNC experience you cannot get anywhere else.
We work with Anthem Capital Group to provide finance solutions to all our customers who are interested. This can range from deferred payments to no money down and a variety of payment lengths. Contact us today and we will make sure you know all your options.
We love talking CNC and are happy to answer any of your questions!